top of page

TorrLube Product Disclaimers

1. Important Notice

The information in this document is provided free of charge and in good faith, and is based on technical data that The TorrLube Company, LLC ("TorrLube") believes to be reliable as of the issue date shown. It is intended for use by persons with technical skill, at their own discretion and risk. Typical properties are not specifications. Because TorrLube has no control over the conditions under which its products are stored, handled, combined with other materials or used, each user is solely responsible for testing the product and determining its suitability for the intended application, for safe handling, storage and disposal in accordance with the Safety Data Sheet, and for compliance with all applicable laws and regulations. TORRLUBE MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, AND ASSUMES NO LIABILITY IN CONNECTION WITH ANY USE OF THIS INFORMATION OR THE PRODUCT, EXCEPT AS EXPRESSLY STATED IN TORRLUBE'S TERMS AND CONDITIONS OF SALE, WHICH GOVERN ALL SALES. Nothing in this document is a license under, or a recommendation to infringe, any patent. Information is subject to change without notice; users should confirm they hold the current version at torrlube.com.

© The TorrLube Company, LLC. TorrLube™ and associated product names are trademarks of The TorrLube Company, LLC.

 

2. Typical Properties

Values shown are typical properties based on laboratory testing of production lots and are subject to normal manufacturing tolerances. They are not specifications and should not be used to prepare specifications. TorrLube makes no warranty that the product will continue to exhibit these typical properties. Product specifications are available on request.

 

Grease Base-Oil Properties

Base-oil thermal and vapor-pressure values describe the PFPE oil alone. Grease service temperature is limited by the PTFE thickener and is stated separately.

 

3. Product Limitations

  • Reactive metals. Freshly exposed or worn surfaces of aluminum, magnesium, titanium and their alloys, and steel under heavy load, can catalyze PFPE breakdown at elevated temperature. Reduce the continuous upper temperature by about 30 °C at loaded contacts of these metals and qualify the system by test.

  • Lewis acids and alkali metals. Avoid contact with Lewis-acid catalysts such as aluminum chloride and boron trifluoride, and with molten alkali metals, especially at elevated temperature.

  • Thermal decomposition. Above about 300 °C, PFPE and PTFE can release toxic fluorinated vapors, including hydrogen fluoride. Provide local exhaust ventilation. Do not smoke in work areas, because tobacco contaminated with the product can cause polymer fume fever.

  • Surface preparation. Remove hydrocarbon, silicone and ester lubricants and organic rust preventives before application. PFPE does not mix with them, and residues reduce performance and raise outgassing.

  • Vacuum and loading. Vapor-pressure and outgassing values are for the materials as tested. Confirm performance at the actual pressure, temperature and contact load before using the product in UHV or space hardware.

  • Critical applications. TorrLube products are not designed or tested for medical implants or devices that contact body fluids. They are not tested for oxygen service unless a document states otherwise. Use in any life-critical system is solely at the user's risk.

 

4. Safety Data Sheet Disclaimer

Disclaimer. The information in this Safety Data Sheet is correct to the best of TorrLube's knowledge, information and belief as of its revision date. It is intended only as guidance for safe handling, use, processing, storage, transport, disposal and release, and is not a warranty or a quality specification of any kind. It applies only to the product named in Section 1 and may not be valid when that product is used in combination with other materials or in any process not described in this sheet. TorrLube cannot anticipate every condition of use. The user is responsible for ensuring safe conditions of handling, storage and disposal, and assumes liability for loss, injury, damage or expense arising from improper use.

 

5. Preliminary Data

Values marked * are engineering estimates derived from base-oil data and have not yet been confirmed by testing of the finished grease. They are provided for preliminary evaluation only and will be replaced by measured values in a future revision.

1. All product properties displayed are solely based on historical data and have not been individually tested. It is important to note that these values are not data specifications and should not be relied upon as such. Users are advised to conduct their own testing and validation to ensure the suitability of the products for their specific applications. TorrLube makes no warranties, expressed or implied, regarding the accuracy or completeness of this information

2. The application recommendations provided are based on historical insights and are not the result of individual product assessments. It's essential to note that these suggestions are not fixed specifications and should not be depended upon as such. We strongly urge users to conduct their own in-depth evaluations, including relevant testing, to ascertain the compatibility and appropriateness of the products for their distinct applications. TorrLube does not offer any guarantees, either explicit or implied, regarding the accuracy or completeness of the information shared. Furthermore, statements concerning the potential use of our products are not meant to be construed as endorsements to utilize our products in violation of any patents

Explore

Sales

Support

Terms

For Semiconductor

Copyright © 2024 TorrlubeLLC. All rights reserved.

bottom of page